Huawei P30 Pro spare parts

Huawei P30 Pro Repuestos - Technical Characteristics

Before initiating the process of replacing Huawei P30 Pro Repuestos, please note the basic technical features of each part. Always remember that safety and accuracy is crucial; therefore, ensure the right tools and parts are on hand.

• Display: 6.47-inch OLED capacitive touchscreen, 1080 x 2340 pixels resolution
• Processor: Kirin 980 octa-core processor
• Battery: 4200mAh, Non-removable Li-Po
• RAM and Storage: 8GB RAM, 128/256/512GB storage
• Camera: Quad-lens rear camera, 40MP+20MP+8MP+ Time-of-Flight
• Fingerprint Sensor: Under Display

Instructions on replacing Huawei P30 Pro Repuestos

Display and Battery Replacement

Make sure you switch off your device before you start replacing Repuestos of Huawei P30 Pro.

• Step 1: Use a heat gun to warm the edges of the phone's back cover. This will help to loosen the adhesive.
• Step 2: Use a suction cup and a plastic opening tool to gradually and carefully lift the back cover.
• Step 3: Once the back cover is removed, unscrew the protector plates using a Philips screwdriver. This will expose the battery and display connectors.
• Step 4: Disconnect the battery and display connecters very carefully. If you're replacing the battery, you can now get your new battery and connect it. If you're replacing the display, proceed to the next step.
• Step 5: Disconnect the rest of the cables connected to the screen. After this, the screen can be removed.
• Step 6: Once the screen is removed, you can replace it with a new one. Carefully reconnect the cables back in their respective positions and screw back the protector plates.
• Step 7: After replacing, stick the back cover using B7000 glue or it's equivalent and ensure it's completely sealed.

Note: The above instructions are simplified and should only be performed by a trained technician. Missteps can result in permanent damage to your device.