Technical Features of the iPhone 15 Plus Screen

Super Retina XDR Display

The 6.7-inch (17 cm) diagonal OLED screen of the iPhone 15 Plus boasts an impressive resolution of 2,796 by 1,290 pixels at 460 pixels per inch. Its rounded corners complement the curved design of the device, situated within a standard rectangle. Diagonally measured, the standard rectangle of the screen spans 6.69 inches, but the actual viewing area is slightly smaller.

Highlighted Technologies

• Dynamic Island
• HDR Display
• True Tone
• Wide Color Gamut (P3)
• Haptic Response

Visual Performance

The iPhone 15 Plus screen offers an impressive 2,000,000:1 (typical) contrast ratio for an immersive visual experience. With a maximum brightness of 1,000 nits (typical), a peak brightness of 1,600 nits in HDR content, and an outdoor peak brightness of 2,000 nits, every detail comes to life with exceptional clarity.

Additional Features

• Oleophobic anti-fingerprint coating
• Compatible with simultaneous display of multiple languages and character groups

Instructions to Replace the iPhone 15 Plus Screen

1. Turn off the iPhone 15 Plus and disconnect it from any power source.
2. Use the appropriate tools, such as screwdrivers and suction cups, to carefully open the device.
3. Locate and remove the screws holding the screen in place.
4. Carefully disconnect the flexible cables from the old screen.
5. Remove the damaged screen and place the new Super Retina XDR screen in position.
6. Reconnect the flexible cables and secure them properly.
7. Reattach the screws and secure them carefully.
8. Turn on the iPhone 15 Plus and verify that the new screen functions correctly.

Remember to follow these instructions carefully, and if in doubt, seek the assistance of a professional.